HP J8762A Switch 2600 - 8 ports - POE - managed - desktop

The ProCurve Switch 2600-8-PWR is a fully managed stackable switch with 8 auto-sensing 10/100 PoE ports and one dual personality Gigabit uplink. With integrated PoE and enterprise level software features in a low-density form factor, this switch is more cost-effective and has better functionality to support wide deployment of wireless access points. It is also ideal for small workgroups or remote offices that require general network connectivity and PoE for IP phones and access points.

Ports

• 8 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)
• Media Type: Auto-MDIX
• Duplex: half or full
• 1 RS-232C DB-9 console port
• 1 dual-personality port: each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers)
• Supports a maximum of 8 auto-sensing 10/100 ports

Physical Characteristics

• Dimensions: 8.86(d) x 17.44(w) x 1.73(h) in. (22.5 x 44.3 x 4.39 cm) (1U height)
• Weight: 7.5 lb. (3.4 kg)

Memory and Processor

• Motorola PowerPC MPC8245 @ 266 MHz
• 8 MB flash
• 32 MB SDRAM

Mounting

• Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only

Performance

• Latency: < 12 µs (LIFO)
• Throughput: up to 6.6 million pps
• Routing/Switching capacity: 9.6 Gbps
• MAC address table size: 8,000 entries

Environment

• Operating temperature: 32ºF to 122ºF (0ºC to 50ºC)
• Operating relative humidity: 15% to 95% @ 104ºF (40ºC), non-condensing
• Non-operating/Storage temperature: -40ºF to 158ºF (-40ºC to 70ºC)
• Non-operating/Storage relative humidity: 15% to 95% @ 149ºF (65ºC), non-condensing
• Altitude: up to 15,000 ft. (4.6 km)
• Acoustic: Power: 57 dB; DIN 45635T.19 per ISO 7779

Electrical Characteristics

• Maximum heat dissipation: 649 BTU/hr (685 kJ/hr), including the switch and attached PoE devices; switch only: 228 BTU/hr (241 kJ/hr)
• Voltage: 100-240 VAC
• Current: 3.3 / 1.7 A
• Power consumption: 190 W
• PoE power: 126W
• Frequency: 50 / 60 Hz
• Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply, this may be supplemented with the use of an External Power Supply (EPS).

Safety

• CSA 22.2 No. 950
• cUL (CSA 950)
• EN 60950/IEC 60950
• NOM-019-SCFI-1994
• UL 1950 3rd edition
• UL 60950

Emissions

• FCC Class A
• VCCI Class A
• EN 55022/CISPR 22 Class A

Immunity

• Generic: EN 55024, CISPR 24
• EN: EN 55024, CISPR 24
• ESD: IEC 61000-4-2; 4 kV CD, 8 kV AD
• Radiated: IEC 61000-4-3; 3 V/m
• EFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
• Surge: IEC 61000-4-5; 1 kV/2 kV AC
• Conducted: IEC 61000-4-6; 3 V
• Power frequency magnetic field: IEC 61000-4-8; 1 A/m, 50 or 60 Hz
• Voltage dips and interruptions: IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
• Harmonics: EN 61000-3-2, IEC 61000-3-2
• Flicker: EN 61000-3-3, IEC 61000-3-3

Management

• HP ProCurve Manager (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)